Advanced Searches
Archives for: 2008 2007 2006 2005
 
2005 top
12/05 Review Altera Development Kits Information  
12/05 Read Lead-Contamination in Lead-Free Electronic Assembly article from AIM  
12/05 New Press Release on PCI Express.  
12/05 Review TI Connecting ADS8410/13 With Long Cable - SLAA284 - Application Note  
11/05 Read Virtex-4 Source-Synchronous Interfaces Tool Kit article from Xcell Journal.  
11/05 Industry Standards and Specifications for SI & Rugged I/O are added to our Signal Integrity Services Menu.  
11/05 Our Glossary has been recently updated with several new terms.  
11/05 Check out our new version of our On-line Catalog.  
11/05 Recently updated QMS/QFS high speed characterization reports.
QMS, QFS, QMS-DP, QFS-DP 		 
11/05 FHSC Series added to the cable builder.  
11/05 Review two recent Xilinx, Inc. papers which include Samtec Connectors.  
11/05 Press Release on Micro Tiger Eye™ Contacts from Samtec Satisfy a Variety of Rugged Interface Applications.  
11/05 See the new layout for our Connector and Cable Bandwidth Performance Charts.  
10/05 You are invited to join Scott McMorrow, President of Teraspeed Consulting LLC, for an informative presentation on Advanced Edge Card Transitions.  
10/05 Press Release on One Piece Interfaces for Rugged Applications Offered by Samtec.  
10/05 QTS-RA/QSS Series added to our Final Inch® area.  
09/05 Catch a discussion of Samtec's Rugged Interfaces with Greg Reidinger, Wednesday, October 12, 2005 at 11:00 AM EST - Daylight Savings  
09/05 Review Samtec's Matte Tin Plating Change Notification.  
09/05 Design Con East 2005 Presentation on "Simplified Design and Modeling of Surface Mount Connector Pad Transitions for Applications at 10 to 20 Gbps" is now available on our white papers/presentations page.  
08/05 Visit Samtec at DesignCon East 2005, Worcester, MA,
September 19 - 21 in booth 207.		  
08/05 Technical Note on Dynamic Range Determination and S-Parameter Accuracy Validation For High Frequency Time Domain Network Analyzer (TDNA) Measurements is now available in our White Papers/Presentations/Articles area.  
08/05 Samtec Asia Pacific receives Distinguished Supplier Award from Benchmark Electronics Thailand.  
08/05 Samtec ranked #1 in Bishop Associates Survey again.  
08/05 Press Release on "Samtec Micro Pitch Interconnects Save Board Area While Providing Spacing Flexibility" on our New Products page.  
08/05 Recording on "How to use Connector Spice Models" Webinar is now available under our Connector Wizard- Webinar archive section.  
08/05 New Presentation on How to Use Spice Models.  
07/05 New Application Notes Available on Q Strip® QTE/QSE Series 16mm Stack Height Final Inch® Design in XAUI Application.  
07/05 Press Release on Differential High Speed Flex Data Link on our New Products page. top
07/05 Samtec is now offering "On Request" test data including eye patterns for our Final Inch® circuits using our new Agilent PLTS 50 GHZ Characterization System.  
07/05 Comparison of Eye Patterns Generated by Synopsis HSPICE and the Agilent PLTS Report available in our White Papers/Presentations/Articles area.  
07/05 EQCD High Data Rate Cable Assembly Spice Model Validation Report available in our White Papers/Presentations/Articles area.  
06/05 Chat Live with an Expert on "High Speed Cable" on July 14, 2005, 11:00am, EST.  
06/05 Understanding the Apparent Impedance of Interconnects Webinar is now available in our White Papers/Presentations/Articles area.  
06/05 Celestica recognizes Samtec with third-year Global Supplier Award.  
06/05 Join us for a free Webinar on Understanding the Apparent Impedance of Interconnects - June 22, 2005, 11:00 am, EST.  
05/05 Press Release on RF Connectors on our New Products page.  
05/05 Press Release on Standard & Semi-Custom Power Cable Assemblies Available from Samtec with Final Inch® Data on our New Products page.  
04/05 RU8 Series added to our Final Inch® area.  
04/05 Press Release on New High Density Differential Arrays Available from Samtec with Final Inch® Data on our New Products page.  
04/05 Chat Live with an Expert on "Lead Free" Thursday April, 28th, 2005.  
03/05 Application Notes now available for the RU8-DP-DV in both the SATA and XAUI industry standards.  
03/05 Designing High Speed Cable Assemblies Presentation is available in our White Papers/Presentations/Articles area.  
03/05 You can now view our Virtual Tour on-line.  
03/05 You can now e-mail your orders to samtec. There will be a link to do this on the E-mail Us page located in the Contact Us Menu and also in the Lead Time Inquiry, Pricing Request, Sudden Samples and EDI Capabilities pages located in the Sudden Service Menu..  
03/05 New Application Notes available for RU8-DP-DV in both 19mm and 25mm for XAUI industry standard. top
03/05 Samtec's new low profile, high speed, Micro Card socket interface (SAL1 Series) provides a unique card-to-board interface for serial ATA™ and other high speed daughter card applications. This micro card connector is expected to perform up to 3 Gbps. This information is located on our Standard Products/New Products section.  
02/05 Application Notes are now available for the QMS-DP & QFS-DP Final Inch® 11mm Stack Height in both the SATA and XAUI industry standards.  
02/05 Scott McMorrow, of Teraspeed Consulting, will provide an overview of things to consider when designing High Speed Cable Assemblies like insertion loss as related to a high speed cable's center conductor size and dielectric constant, the pro's and con's of using twin-ax vs. co-ax cable, the availability of SPICE models for high speed cable assemblies, Samtec's on-line tools, and much more. Sign up today for this free and informative presentation. Link to: http://www.connectorwizard.com/communication/webinar/home.asp
 		 
02/05 RoHS Compliant presentation now available in our White Papers/Presentations/Articles area.  
02/05 Final Inch® - A Plug-and-Play Reference Design Solution for High Speed Interconnects presentation now available in our White Papers/Presentations/Articles area.  
01/05 Samtec Golden Standard Documents are available in our Signal Integrity Center. Click here to view Part 1 an Overview of the Golden Standard, and click here to view Part 2 on Transmission Line Theory.  
01/05 Correlation Report now available on Final Inch® Simulations vs. Lab Measurements with the Xilinx® RocketIO™ Evaluation Board  
01/05 MMCX Series added to our Final Inch® area.  
01/05 Application Notes now available for Q2™ AMS-DP/QFS-DP Final Inch® Designs in PCI Express Applications 11mm Stack Height  
01/05 Application Notes now available for DP Array™ DPAM/DPAF Final Inch® 10mm Stack Height Applications in the PCI Express, XAUI and SATA Industry Standards  
01/05 Application notes now available on the SEARAY™ SEAM/SEAF Final Inch® Designs in Rapid IO Short Run (Mezzanine) Applications 7mm Stack Height  
01/05 Samtec to open Silicon Valley Office  
01/05 Samtec Named DesignVision Award Finalist.  
2004 top
12/04 Samtec Inc. Acquires Terabit Cable Systems.  
12/04 Samtec France awarded "The Best Supplier of the Year" for Connectors, Cables, Switches, and Energy in 2004.  
12/04 Visit Samtec at DesignCon 2005, Santa Clara, CA,
January 31 - February 3, in booth 325.		  
11/04 Samtec selected as Celestica Partners in Performance Award for second year in a row.  
11/04 Samtec Product Change Notifications are now available on www.samtec.com.  
11/04 Samtec's Connector Wizard Webinar Presentations are now available in our White Papers/Presentations/Articles area.  
11/04 Samtec is a member of the following Professional Associations.  
11/04 Samtec Europe ranked #1 again in Bishop Associates Survey.  
11/04 Nokia M2M Connectors are now available from Samtec.  
11/04 DPAF Edgemount, Differential Pair using Samtec's EDPAF Series has been added to our Final Inch® area.  
11/04 See Samtec's July 2006 Roadmap for Lead-Free Processing.  
10/04

Scott McMorrow, of Teraspeed Consulting, will provide an overview of things to consider when designing Flex Circuit Assemblies for High Speed application, the types of software Samtec uses when designing high speed Flex Circuits, and the manufacturing process required for high speed Flex Circuits. Sign up today for this free and informative presentation. Link to: http://www.connectorwizard.com/communication/webinar/home.asp

  
10/04 Samtec now has Application Notes available for our Q Pair®
QTE-DP/QSE-DP Final Inch® Designs in Multi-Connector Stack PCI Express Applications in a 16mm stack height.		  
10/04 Emulation Technology’s newest probing adapter supports the Agilent differential and single-ended probes with Samtec’s ASP-65067-01  
09/04 Samtec now has Application Notes available for our Q Pair®
QTH-DP/QSH-DP Final Inch® Designs in Serial ATA Generation 1 Applications in a 5mm stack height.		  
09/04 Samtec now has Application Notes available for our QTH-DP/QSH-DP in both XUAI and PCI Express Applications in a 5mm stack height. top
09/04 Samtec selected as Celestica "Partner in Performance for 2003".  
09/04 SEAF/SEAM series added to our Final Inch® area.  
08/04 Samtec ranked #1 in Bishop Associates Survey again.  
08/04 QMS/QFS series added to our Final Inch® area.  
08/04 Samtec now has Application Notes available for our QTE/QSE-DP Series in Serial ATA Generation 1 applications in a 5mm stack height.  
07/04 Scott McMorrow, President of Teraspeed Consulting LLC, will give an informative presentation on how the performance of a connector is influenced by outside design criteria like pinout schemes.
Sign up today to attend this free and informative presentation.
  
07/04 Samtec now has Application Notes available for Rapid IO in a 10mm stack height.  
07/04 Samtec now has available a library of PADS files of our recommended footprints and schematics for select Samtec Products.  
07/04 Now available VITA 42, XMC/RapidIO RMC Mezzanine Connectors for both the Carrier Side and the Module Side.  
07/04 Chat with Julian Ferry, Samtec's Signal Integrity Manager, on Thursday, July 29th at 11:00am EST.  
06/04 Samtec has won Rosemount Emerson's Strategic Supplier Award for its quality, on time delivery, and price.  
06/04 Samtec now has Application Notes available for PCI Express in a 16mm stack height.  
06/04 Samtec has recently added a new white paper on using Copper Shield and Silver-Ink Shield with their HFEM Series high speed flex cable assembly.
  
06/04 Samtec now has Application Notes available for XAUI.  
06/04 Samtec adds DP Array™ products in our Final Inch® area.  
05/04 Samtec now has Application Notes available for PCI Express.  
04/04 Emad Soubh, Samtec's System Cable Interconnect Project Manger, will discuss why high speed cable is needed today, the different types of cable construction, and methods for selecting cable assemblies. Sign up today for this free and informative webinar.  
03/04 Samtec adds SamArray™ products (YFS/YFT/YFW Series) to our Final Inch® area.  
03/04 Samtec has selected Flex Interconnect Technologies (FIT) as a strategic partner in providing flex circuits. FIT has been selected by Samtec for prototype and pre-production quantities of flex and rigid flex circuits.  
03/04 Check out Samtec's latest White Papers, Articles, and Press Releases on Samtec's Connector Wizard website.  
03/04 Samtec now has available Performance Bandwidth Selectors for Connectors with Single-Ended and Differential Pair signaling as well as Cable Assemblies with both Single-Ended and Differential Pair signaling.
  
02/04 Visit Samtec at DesignCon East 2004, April 5 - 7, Boxborough Woods, MA, Booth number 216.  

02/04

 

 Check out Samtec's New Cable Performance Calculator. Determine the single line Data Rate based on the configuration of the cable assembly you need, the length of your assembly and the allowable insertion loss required for your application.
  
02/04 Samtec now has translated sites for China, Japan, Germany and Italy.  
01/04 Samtec is now a member of the EIA IBIS Open Forum  
2003 top
12/03 View recently updated Chinese Catalog pages.  
11/03 Samtec Worldwide Holiday Schedule.  
10/03 Samtec ranked #1 in Bishop Associates Survey again.  
10/03 Samtec adds new product series to our Final Inch® area.  
10/03 Check out Samtec's new Picture Search.  
09/03 View our environmental compliance list in reference to RoHS, WEEE, and ELV guidelines.  
09/03 Samtec is now offering Application Tooling, hand tooling and automated presses, for discrete wire systems!  
09/03 Lead-Free Plating – Review the list of all available test reports using Satin Tin plating in a lead-free processing environment.  
08/03 Samtec announces second source licensing agreement with Tyco Electronics.  
08/03

Samtec adds a Micro Rugged Section to our website that includes Align and Latch Board-to-Board, Micro Plane and One Piece Interfaces, Rugged Contacts, Power-to-Boards, Micro Rugged Cable Assemblies and Discrete Wire - Board-to-Board connectors.

  
07/03 Samtec ranked #1 in Bishop and Associates "European Bishop Award" for the Second year in a row.  
07/03 Samtec is selected as one of Celestica's Partners in Performance. This is the second time that Samtec has one this award.  
07/03 Samtec's Final Inch® modeling and test tools for high-speed connectors is featured in the July 17th article by Gina Roos in EE Times.
top
07/03 Check out Samtec's new interactive Build a High Data Rate Cable Assembly Program.
  
07/03 Samtec has added information in our Signal Integrity Center on
Final Inch®, our Break Out Region design around a high speed connector optimized for performance and manufacturability.		  
07/03 Visit Samtec's booth at Wescon 2003  
06/03 David Givens, Samtec’s Signal Integrity Division Business Development Manager, along with Julian Ferry, Samtec’s High Speed Engineering Manager, will provide an overview of how Samtec designs the break out region (BOR) around a high speed connector and how Samtec offers free assistance and tools when using this design. Sign up today for this free and informative webinar.  
06/03 Samtec introduces their newly expanded full-line catalog!  
05/03 Samtec’s Connector Wizard is now live. It is an on-line engineering resource containing design, search, communication and reference tools, as well as immediate access to expert technical support, for the development of high speed interconnects and flex circuitry systems.  
05/03 Chat with David Givens about how in-depth Signal Integrity Support will play an increasing important role in electronic system design going forward and how Samtec has structured itself to lead the interconnect industry in this critical area.  
04/03 Rockwell Collins names Samtec Connector Commodity Supplier of the Year for 2003.  
04/03 Now available from Samtec is an Automotive Interconnect Guide that features the Samtec interconnects that are ideal for use in Audio, Safety, Interior and Control Module automotive applications.  
03/03 Samtec's Flex Circuitry Center has been completely updated with more information on our Flex Circuitry capabilities as well as a complete new line of standard products.  
03/03 Samtec to sponsor Signal Integrity Seminars in India during April.  
01/03 Samtec's Signal Integrity Center has been completely updated with more information and is even more user-friendly than before.  
2002 top
12/02 Samtec now offers design, modeling and testing of your subsystem or complete system with our Signal Integrity Services  
11/02 eBrochures now available.  
11/02 Samtec now has available dynamically generated 3D Models for on-line viewing and downloading.  
11/02 A new Search by Data Rate is now available in Samtec's Signal Integrity Center.  
10/02 Samtec ranked #1 in Bishop and Associates "2002 Customer Survey Of the Electronic Connector Industry" for SEVENTH year in a row.  
09/02 New Electrical and Micro Rugged Literature Now Available.  
09/02 Samtec in cooperation with Picolight now offer a SFP cage with press fit leads, solder leads and press fit leads for PCI applications.  
08/02 IBIS Models Now Available from Samtec  
07/02 Samtec announces FREE Agilent Test Probe offer  
05/02 Navigate New Samtec Website with Site Map Help  
05/02 New Samtec Website Unveiled  
04/02 Samtec is Key for all of Agilent's Logic Analyzers  
03/02 Samtec has Micro Rugged™ connectors for high tech military and automotive applications  
01/02 Visit our recently updated "Contact Us" area  
2001 top
12/01 Samtec ASP enables Agilent to incorporate their new EYE SCAN validation system. Read Wirelesss Design & Development article.  
08/01 Check out Samtec's New Sam Array Interfaces  
08/01 Samtec Wins NA Bishop & Associates Survey for the 6th Year in a Row  
07/01 Bishop Names Samtec Customer Survey Supplier of the Year in Europe  
07/01 Try Samtec's New Search by Picture Program  
06/01

Samtec is Selected as a Celestica Partner in Performance

  
06/01

Rockwell Names Samtec Connector Commodity Supplier Of The Year

  
06/01 Samtec is QS9000 Certified  
2000 top
12/00

Jabil names Samtec a Strategic Partner

 
View Current News Center Articles  
     
Disclaimer: The information in the News Center may change without notice. All information posted here is "As Is" at time of release. Samtec, Inc. does not warrant that errors or changes will be corrected.  
 
Tel: 1-800-SAMTEC-9 (800-726-8329) +812-944-6733 E-mail:  info@samtec.com Copyright © Samtec, Inc.