|
|
|
|
|
Signal Integrity Services
 |
Samtec has two different types of 3D models from
which you may choose depending on the amount of
detail needed in the model. Both models are
acceptable for form, fit and function in most cases. |
|
|
Basic Detail Models
|
|
|
|
Basic 3D Models do not include inside body or pin
details and are parts rather than assemblies, so they
will have smaller file size and will be quicker to download.
Although there are fewer Samtec product series in this list,
every part number within that series will be available in
all major formats including Pro/E, Solidworks, Mechanical
Desktop, IGES, STEP, Parasolid, ACIS and many more. The 3D
Models for these can also be viewed on-line
To view
a Basic model, select the standard Samtec Series from the
list to the left. Then click next.
|
Full
Detail Models
|
|
|
|
Full Detail 3D Models include inside body and
pin detail and are assemblies rather than parts, so the
file size will be larger. The majority of all Samtec
product series are included in this list; however, not
every part number for each series will have a model
available. Models are available in IGES, STEP, Parasolid
and ACIS formats.
To view a Full Detail model,
select the standard Samtec Series from the list to the
left. Then click next.
|
Request
New Models
|
|
If you do not find the Samtec
product series that you need in the list above,
please click the button below to request a new
model. New models take 5-7 days to be created. Once
finished, an e-mail will be sent informing you that
the new model can be downloaded. Please note,
requests cannot be completed without a valid email
address and/or phone number.
|
|
While Samtec, Inc. has used reasonable efforts to
ensure the model’s accuracy, Samtec does not
guarantee that it is error-free. By downloading the
files, you agree and understand that the information
downloaded may not be completely accurate and the
products depicted may not be the most recent
version. You further agree that these files will be
used at your own risk.
|
ACD, ASP, CEP, HDR, LF0100, LF0150, MEP, PCBA, REF, RSP, SCF, SEP, SUB-ASP Series - Information is not available here for Application Specific Products. Contact eASP for any information on this series of connectors. To create a new Application Specific Product, please visit our Custom Products Section. For information on our ASP connectors used in Agilent Logic Analyzer and other Test Probes and Debug Devices, Vita 42 XMC/RapidIO, Micro High Frequency, Nokia M2M, Altera, and PC/104 Express applications, please visit our Highlight ASP area.
If you do not find the product series you are looking for above, please contact
eNewProducts.
To ensure a product meets TS 16949, automotive, or any other specific standards,
the product must be an ACD Series. Go to www.samtec.com/TS
for complete details.
|
|
| I/O Products - 3D models for
most of Samtec's I/O products are not yet available.
Check for desired part under the "Full Detail"
category above. If the series is not listed, click
"3D Models" request button. |
|
|
|