Ultra slim, ultra low profile and ultra fine pitch interconnects.

FEATURES

  • Ultra fine pitch – 0.40 mm and 0.50 mm
  • Ultra low stack down to 2.00 mm
  • Slim body design for increased board space savings

SERIES

SS4

0.40 mm Razor Beam™ LP Ultra Fine Pitch Socket Strip

Features
  • Samtec 28+ Gbps Solution
  • Ultra fine 0.40 mm pitch
  • Stack heights from 4 mm - 6 mm
  • Slim footprint
  • Up to 100 I/Os
0.40 mm Razor Beam™ LP Ultra Fine Pitch Socket Strip

ST4

0.40 mm Razor Beam™ LP Ultra Fine Pitch Terminal Strip

Features
  • Samtec 28+ Gbps Solution
  • Ultra fine 0.40 mm pitch
  • Stack heights from 4 mm - 6 mm
  • Slim footprint
  • Up to 100 I/Os
0.40 mm Razor Beam™ LP Ultra Fine Pitch Terminal Strip

SS5

0.50 mm Razor Beam™ LP Slim Socket Strip

Features
  • Ultra fine 0.50 mm pitch
  • Samtec 28+ Gbps Solution
  • Slim body design for increased board space savings
  • Ultra low mated stack heights down to 4 mm
  • Up to 160 I/Os
  • UL: File # E111594
0.50 mm Razor Beam™ LP Slim Socket Strip

ST5

0.50 mm Razor Beam™ LP Slim Terminal Strip

Features
  • Ultra fine 0.50 mm pitch
  • Samtec 28+ Gbps Solution
  • Slim body design for increased board space savings
  • Ultra low mated stack heights down to 4 mm
  • Up to 160 I/Os
  • UL: File # E111594
0.50 mm Razor Beam™ LP Slim Terminal Strip

SLH

0.50 mm Razor Beam™ LP Ultra Low Profile Socket Strip

Features
  • Ultra low mated stack heights down to 2 mm
  • Ultra fine 0.50 mm pitch
  • Up to 60 I/Os
  • Slim body design for increased board space savings
  • Optional alignment pin
  • UL: File # E111594
0.50 mm Razor Beam™ LP Ultra Low Profile Socket Strip

TLH

0.50 mm Razor Beam™ LP Ultra Low Profile Terminal Strip

Features
  • Ultra low mated stack heights down to 2 mm
  • Ultra fine 0.50 mm pitch
  • Up to 60 I/Os
  • Slim body design for increased board space savings
  • Optional alignment pin
  • UL: File # E111594
0.50 mm Razor Beam™ LP Ultra Low Profile Terminal Strip

In November, we continued our mobile updates to the website, released a couple of new content experiences, and made placing sample requests even easier. Read more below on these and the rest of the major updates to Samtec.com for November 2018. Continued Improvements to our Mobil...
A joint demonstration between Samtec and eSilicon — an eSilicon 7 nm 56 Gbps DSP SerDes over a Samtec 5 meter ExaMAX® backplane cable assembly — caught a lot of attention at SC18. The demo showed a true long-reach capability with a high-performance, flexible, easy-to-configure Se...
Over the past few years, Samtec has expanded its portfolio of Characterization and Development Kits. Engineers and designer demand the best tools for system prototyping. From concept and prototype to development and production, Samtec-designed Characterization and Development Kit...
That’s shocking! Insulation Resistance and Dielectric Withstanding Voltage are two of the qualification tests that Samtec performs in-house during part qualification testing. These tests will ensure that when a connector is used in environmental conditions at the rated working vo...
As corporations worldwide become more mobile-friendly to their workforce, the Internet needs to evolve to match. This has been a huge trend in the B2C space for the last decade, and is now quickly catching up to the B2B space. We’ve seen our mobile user base grow rapidly in the p...