Threaded coupling interface in standard and reverse polarity.

FEATURES

  • Performance up to 6 GHz
  • Right-angle through-hole jack
  • Straight plug or bulkhead jack
  • RG 174, RG 316, RG 178 or RG 58 cable terminations

SERIES

GRF1H-C

5.00 mm 50 Ohm Ganged Hybrid Micro-Miniature RF Plug, Cable Assembly

Features
  • High-performance, rugged contact
  • 5.00 mm (.1969") pitch
  • Optional captive panel screws
  • Double ended
  • Cable: RG316, 26 AWG
5.00 mm 50 Ohm Ganged Hybrid Micro-Miniature RF Plug, Cable Assembly

RF058

50 Ohm RF Cable Assembly, RG 58 Cable

Features
  • 20 AWG, RG 58 cable
  • 50 ohm impedance
  • Available with SMA, TNC and N Type terminations
  • Single or double ended
50 Ohm RF Cable Assembly, RG 58 Cable

RF174

50 Ohm RF Cable Assembly, RG 174 Cable

Features
  • 26 AWG, RG 174 cable
  • 50 ohm impedance
  • Single or double ended
50 Ohm RF Cable Assembly, RG 174 Cable

RF178

50 Ohm RF Cable Assembly, RG 178 Cable

Features
  • 30 AWG, RG 178 cable
  • 50 ohm impedance
  • Single or double ended
50 Ohm RF Cable Assembly, RG 178 Cable

RF316

50 Ohm RF Cable Assembly, RG 316 Cable

Features
  • 26 AWG, RG 316 cable
  • 50 ohm impedance
  • Single or double ended
50 Ohm RF Cable Assembly, RG 316 Cable

TNC-CA

50 Ohm TNC Jack or Plug, Cable Termination

Features
  • TNC cable component
  • 50 ohm impedance
  • Straight plug available on RG 174, RG 316 or RG 178 cables
  • Reversed polarity straight plug available on RG 58 cable
50 Ohm TNC Jack or Plug, Cable Termination

TNC-TH

50 Ohm TNC Jack, Through-hole

Features
  • Performance: up to 6 GHz
  • Impedance: 50 ohm
  • Orientation: right-angle
  • Termination: Through-hole
50 Ohm TNC Jack, Through-hole

A key component of any high-speed signal path is the interconnect.  Design engineers must identify the right connector (or connectors) and the best performance for the application. At 56 Gbps PAM4 data rates (and higher), connector selection becomes more challenging. Interconnect...
It’s been over a year since we last updated the Samtec homepage. As you may have already noticed, we recently took some time to refresh it. You can see a comparison below of the old homepage (top), vs the new homepage (bottom). The new update puts more attention on our high speed...
If you manufacture overseas and ship into the U.S.A, you may have a longer waiting time in Customs than you would prefer.  Some of this waiting time could be eliminated by becoming part of the Customs Trade Partnership Against Terrorism (C-TPAT), one layer of the U.S. Customs and...
Just about everybody wishes they had more time to pursue a hobby or a side project.  Some aspire to be painters or furniture makers.  Others like to rebuild cars.  Even others enjoy electronics in any form. The Maker Movement attracts and caters to tinkerers, hobbyists, students ...
Demand For High Data Rate As the need for bandwidth continues to increase, so does the need for higher data rates within a system. What was once one to three Gbps, then moved to 4 to 8 Gbps, and now we are approaching 28 Gbps and looking forward to 56 G. This trend was recently [...
View Full Site