SMP RF Cable Assemblies, Precision RF, 50 Ohm, 40 GHz Cable Assemblies
SMP RF Cable Assemblies to 40 GHz. Ideal for high-performance test applications. SMP interconnects enable blind-mating with axial misalignment. Available with Samtec's high-performance low loss microwave cable assemblies.
RF25S
Solid FEP Dielectric, 25 AWG Microwave Cable Assembly
Features
- VSWR: See RF25S Graph
- Impedance: 50 Ω
- Bend Radius: 9.0 mm Min
- Capacitance: 96.8 pF/meter
- Operating Temp: -40 ºC to +200 ºC
- Frequency Range: 20 GHz max (cable & connector dependent)
- Insertion Loss: See RF25S Graph
- 25 AWG solid dielectric low loss microwave cable
- End 2 options: SMA, SMP
RF405
50 Ohm RF Cable Assembly, 24 AWG Semi-Flexible Cable
Features
- VSWR: See RF405 Graph
- Impedance: 50 Ω
- Bend Radius: 6.35 mm Min
- Capacitance: 104.97 pF/meter
- Operating Temp: -40 ºC to +125 ºC
- Frequency Range: 20 GHz max (cable & connector dependent)
- Insertion Loss: See RF405 Graph
- 24 AWG hand-formable, semi-flexible cable (.086" DIA)
- Straight or right-angle SMA or SMP plug cable terminations
RF23C
High-Performance Microwave Cable with Copper Foil Shielding
Features
- Impedance: 50 Ω
- Frequency Range: DC to 50 GHz (2.40 mm & SMPM), DC to 40 GHz (2.92 mm, SMP), DC to 26.5 GHz (SMA)
- Velocity of Propagation: 70%
- Capacitance: 84 pF/meter
- Time Delay: 4.75 ns/meter
- VSWR: 1.4:1 Max (2.92 mm & 2.40 mm), DC to 26.5 GHz: 1.2:1 Max (SMPM), 26.5 GHz to 50 GHz: 1.4:1 Max (SMPM), 1.3:1 Max (SMA)
- Insertion Loss: See RF23C Graph
- Power Handling: See RF23C Graph
- Bend Radius: 3.18 mm Min
- Operating Temp: -65 ºC to +125 ºC
- 23 AWG solid dielectric low loss microwave cable
RF086
50 Ohm .086” RF Millimeter Wave Cable Assembly
Features
- Impedance: 50 Ω
- Frequency Range: DC to 67 GHz (1.85 mm, SMPM), DC to 50 GHz (2.40 mm), DC to 40 GHz (2.92 mm, SMP), DC to 26.5 GHz (SMA)
- Velocity of Propagation: 79%
- Capacitance: 84 pF/meter
- Time Delay: 4.20 ns/meter
- VSWR: 1.4:1 Max (50 GHz to 67 GHz SMPM, 2.0:1 Max)
- Insertion Loss: See RF086 Graph
- Power Handling: See RF086 Graph
- Bend Radius: 8.9 mm Min
- Operating Temp: -55 ºC to +125 ºC
- .086” low-loss flexible cable, 23 AWG
RF047-A
50 Ohm, .047" RF Millimeter Wave Cable Assembly
Features
- Impedance: 50 Ω
- Frequency Range: DC to 110 GHz (1.00 mm), DC to 90 GHz (1.35 mm), DC to 65 GHz (1.85 mm, SMPM), DC to 50 GHz (2.40 mm), DC to 40 GHz (2.92 mm, SMP), DC to 26.5 GHz (SMA)
- Velocity of Propagation: 70%
- Capacitance: 95 pF/meter
- Time Delay: 4.76 ns/meter
- VSWR: 1.35:1 Max (2.92 mm & 2.40 mm), 1.4:1 Max (1.00 mm to 90 GHz, 1.35 mm, 1.85 mm & SMPM), 1.5:1 Max (1.00 mm 90 GHz to 110 GHz)
- Insertion Loss: See RF047-A Graph
- Power Handling: See RF047-A Graph
- Bend Radius: 5.0 mm Min
- Operating Temp: -65 ºC to +125 ºC
- .047" low-loss flexible cable, 29 AWG
SMP-B
50 Ohm SMP Jack, Bullet Adaptor
Features
- Jack bullet adaptor for SMP board mount plugs
- Allows board spacing of 9.05 mm (.356") or 17.10 mm (.673")
- Non-magnetic option available for medical and aerospace applications
- Non-magnetic option available for medical and aerospace applications
SMP-SM
50 Ohm SMP Plug, Surface Mount
Features
- Compensates for misalignment in X and Y directions
- Full detent, limited detent, smooth bore or catcher's mitt
- Standard surface mount (versus swept contact) for best performance
- 50 ohm impedance
- Performance to 40 GHz
- Cable-to-board or board-to-board applications
- Push-on interface for quick installation, or blind mate
SMP-TH
50 Ohm SMP Plug, Through-hole
Features
- Compensates for misalignment in X & Y directions
- Full detent, limited detent, smooth bore or catcher's mitt
- 50 ohm impedance
- Performance to 40 GHz
- Non-magnetic option available for medical and aerospace applications
SMP-MT
50 Ohm SMP Plug, Mixed Technology
Features
- Compensates for misalignment in X and Y directions
- Full detent, limited detent, smooth bore or catcher's mitt
- Mixed technology with standard surface mount (versus swept contact) for best performance
- Board thickness options: (1.60 mm) .062” or (2.36 mm) .093”
- Performance to 40 GHz
- 50 ohm impedance
- Cable-to-board or board-to-board applications
- Push-on interface for quick installation, or blind mate
SMP-EM
50 Ohm SMP Plug, Edge Mount
Features
- Compensates for misalignment in X & Y directions
- Full detent, limited detent and smooth bore
- 50 ohm impedance
- Performance to 40 GHz
- Non-magnetic option available for medical and aerospace applications
CONTACT SALES
First Name
Last Name
Company
Industry
Estimate Annual Usage
Family
Message
Don't want to fill out a form?
Chat with a product expert directly.
More RF Cable Assemblies
© 2023 Samtec. All rights reserved.