密封IO
系统

Bulls Eye® 高性能测试
高达70 GHZ的优化性能 • 高密度 • 节省空间的设计

Samtec Bulls Eye®产品系列的高密度阵列设计和先进的布线解决方案支持高达70 GHz的测试和测量应用。通过与电路板连接的压缩接口,消除了焊接成本,实现轻松开/关和长使用寿命。与传统SMA相比,高密度和节省空间的设计可实现更小型的评估板和更短的走线长度。

Bulls Eye®双排70 GHz测试系统兼容224 Gbps PAM8、224 Gbps PAM6、224} Gbps PAM4和112 Gbps NRZ,并具有360º接地(带状线)、弹簧加载端子。50 GHz系统设计有信号和接地弹簧针触点,以及2.40 mm终端连接器。额外的双排和四排系统可提供2.92 mm终端连接器。

Bulls Eye®高性能测试手册

Bulls Eye®高性能测试手册

下载PDF文件
Bulls Eye®高性能测试手册

产品

BE70A

70 GHz,Bulls Eye®高性能测试组件

特色
  • 112 Gbps PAM4 SerDes表征
  • 360° 接地(带线),弹簧加载端子
  • .086电缆
  • 1.85 mm连接到仪表
  • 性能高达70 GHz
  • 单排或双排
  • 微带/CPW或带线PCB传输
  • 50欧姆阻抗
  • 替换电缆(BE70C系列)及区块(BE70B系列)可用
  • 本演示中通道二信号路径使用的是BE70A:结果显示112 Gbps PAM4数据运行几乎没有错误,e-11或更好,Pre-FEC
  • 224 Gbps PAM4 SerDes表征可能具有某些SI优化考量(观看视频
70 GHz,Bulls Eye®高性能测试组件

BE40A

50 GHz,Bulls Eye®高性能测试组件

特色
  • 56 Gbps PAM4 SerDes表征
  • 56 Gbps PAM4 SerDes表征
  • 增强系统设计,配有信号及弹簧顶针
  • 2.40 mm (50 GHz) 或2.92 mm (40 GHz) 连接到仪表
  • 性能高达50 GHz
  • 双排
  • 微带/CPW或带线PCB传输
  • 50欧姆阻抗
  • 23 AWG配有铜制外壳的固体介质低损耗微波电缆
  • 替换电缆(BE40C系列)及区块(BE40B系列)可用
50 GHz,Bulls Eye®高性能测试组件

BDRA

20 GHz,Bulls Eye®:双排高性能测试系统

特色
  • 23 AWG固体介质低损耗微波电缆
  • 固定端子设计
  • 50欧姆阻抗
  • 可提供置换电缆(BE23 S系列)、区块(BDR系列)和弹件
20 GHz,Bulls Eye®:双排高性能测试系统

BQRA

20 GHz, Bulls Eye®:四排高性能测试系统

特色
  • 23 AWG固体介质低损耗微波电缆
  • 固定端子设计
  • 50欧姆阻抗
  • 可提供置换电缆(BE23 S系列)、区块(BQR系列)和弹件
20 GHz, Bulls Eye®:四排高性能测试系统


Nvidia had its annual GTC gathering of AI developers, fans, media, and gamers recently. The newly announced Nvidia Blackwell platform is scheduled for release in late 2024/early 2025. Blackwell will […] The post From AI to SI: Samtec Participates on Two Upcoming Webinars appeared...
There are several Advantages of Being a Samtec Co-Op, but at the heart of the Samtec Co-Op program, the main goal is to foster, nurture, and provide engaging, hands on […] The post An Interview with Business Co-Op’s at Samtec appeared first on The Samtec Blog....
OFC, the Optical Fiber Communications Conference, is all about optical networking and communications. Samtec was front and center showcasing 224 Gbps PAM4 solutions, next-generation transceivers for optical and copper, CXL-over-optics, […] The post Cutting Edge Copper and Optical...
Designing and optimizing a breakout region (or component launch) for a connector can be challenging. It often requires multiple back and forth iterations and analysis to adjust variables. Samtec’s new […] The post How to Design Component Launches Faster appeared first on The Samt...
It’s that time of year again. The world of CoMs, SoMs, interconnect and more all converge next week. The world of embedded systems is multifaceted – from hardware and software […] The post Guten Tag! Visit Samtec at embedded world 2024 in Nuremberg appeared first on The Samtec Bl...