Q Strip® High-Speed Interconnects

Samtec Q Strip® connectors are designed for high speed board-to-board applications where signal integrity is essential.


FAMILY OVERVIEW

Q Strip Video

The Q Strip® connectors have surface mount signal contacts as well as a surface mount ground plane between the two rows of signals for improved electrical performance. Mated sets of the Q Strip® connectors are available in 8 different stack heights from 5 mm (.197") to 30 mm (1.180"). Options include guide posts for blind mate scenarios as well as alignment pins and locking clips for proper connector placement before reflow.

FEATURES

  • Performance: Up to 14.0 GHz /28 Gbps
  • Integral ground/power plane
  • Connector to connector retention options
  • Vertical, perpendicular, and coplanar applications
  • Contacts: Up to 180 I/Os
  • Stack height: 5.00 mm - 25.00 mm

DOWNLOADS

Literature

Micro Backplane Design Guid

Q Strip® eBrochure

Get
High-Speed Board-to-Board Application Guide

High-Speed Board-to-Board Application Guide

Get
Broadcast Video Solutions Guide

Broadcast Video Solutions Guide

Get

SERIES

QSH

0.50 mm Q Strip® High-Speed Ground Plane Socket Strip

Features
  • 0.50 mm (.0197") pitch
  • Up to 300 positions
  • 5 mm - 30 mm stack heights
  • Extended Life Product™ (E.L.P.™)
  • Samtec 28+ Gbps Solution
0.50 mm Q Strip® High-Speed Ground Plane Socket Strip

QTH

0.50 mm Q Strip® High-Speed Ground Plane Terminal Strip

Features
  • 0.50 mm (.0197") pitch
  • Up to 300 positions
  • 5 mm - 30 mm stack heights
  • Extended Life Product™ (E.L.P.™)
  • Samtec 28+ Gbps Solution
0.50 mm Q Strip® High-Speed Ground Plane Terminal Strip

QSS

0.635 mm Q Strip® High-Speed Ground Plane Socket Strip

Features
  • 0.635 mm (.025") pitch
  • Up to 9.5 GHz / 19 Gbps
  • Up to 250 positions
  • 5 mm - 16 mm stack heights
  • Extended Life Product™ (E.L.P.™)
0.635 mm Q Strip® High-Speed Ground Plane Socket Strip

QTS

0.635 mm Q Strip® High-Speed Ground Plane Terminal Strip

Features
  • 0.635 mm (.025") pitch
  • Up to 9.5 GHz / 19 Gbps
  • Up to 250 positions
  • 5 mm - 16 mm stack heights
  • Extended Life Product™ (E.L.P.™)
0.635 mm Q Strip® High-Speed Ground Plane Terminal Strip

QSE

0.80 mm Q Strip® High-Speed Ground Plane Socket Strip

Features
  • 0.80 mm (.0315") pitch
  • Up to 200 positions
  • 5 mm - 30 mm stack heights
  • Extended Life Product™ (E.L.P.™)
  • Samtec 28+ Gbps Solution
0.80 mm Q Strip® High-Speed Ground Plane Socket Strip

QTE

0.80 mm Q Strip® High-Speed Ground Plane Terminal Strip

Features
  • 0.80 mm (.0315") pitch
  • Up to 200 positions
  • 5 mm - 30 mm stack heights
  • Extended Life Product™ (E.L.P.™)
  • Samtec 28+ Gbps Solution
0.80 mm Q Strip® High-Speed Ground Plane Terminal Strip

QTS-RA

0.635 mm Q Strip® High-Speed Ground Plane Terminal Strip, Right-Angle

Features
  • 0.635 mm (.025") pitch
  • Dual sourced by TE Connectivity as the MICTOR SB
  • Guide post option
  • Up to 200 positions
  • Up to 4.5 GHz / 9 Gbps
0.635 mm Q Strip® High-Speed Ground Plane Terminal Strip, Right-Angle

QSS-RA

0.635 mm Q Strip® High-Speed Ground Plane Socket Strip, Right-Angle

Features
  • 0.635 mm (.025") pitch
  • Dual sourced by TE Connectivity as the MICTOR SB
  • Guide post option
  • Up to 200 positions
  • Up to 4.5 GHz / 9 Gbps
0.635 mm Q Strip® High-Speed Ground Plane Socket Strip, Right-Angle

In November, we continued our mobile updates to the website, released a couple of new content experiences, and made placing sample requests even easier. Read more below on these and the rest of the major updates to Samtec.com for November 2018. Continued Improvements to our Mobil...
A joint demonstration between Samtec and eSilicon — an eSilicon 7 nm 56 Gbps DSP SerDes over a Samtec 5 meter ExaMAX® backplane cable assembly — caught a lot of attention at SC18. The demo showed a true long-reach capability with a high-performance, flexible, easy-to-configure Se...
Over the past few years, Samtec has expanded its portfolio of Characterization and Development Kits. Engineers and designers demand the best tools for system prototyping. From concept and prototype to development and production, Samtec-designed Characterization and Development Ki...
That’s shocking! Insulation Resistance and Dielectric Withstanding Voltage are two of the qualification tests that Samtec performs in-house during part qualification testing. These tests will ensure that when a connector is used in environmental conditions at the rated working vo...
As corporations worldwide become more mobile-friendly to their workforce, the Internet needs to evolve to match. This has been a huge trend in the B2C space for the last decade, and is now quickly catching up to the B2B space. We’ve seen our mobile user base grow rapidly in the p...