Q Pairs® Differential Pair Interconnects

Q Pairs®

Samtec Q Pairs® connectors are designed for high-speed board-to-board applications where signal integrity is essential.

FEATURES

  • Performance: Up to 10.5 GHz / 21 Gbps
  • Optimized for 100 ohm systems
  • Integral ground/power plane
  • Stack height: 5.00-25.00 mm
  • Contacts: Up to 100 pairs

SERIES

QSE-DP

0.80 mm Q Pairs® High-Speed Ground Plane Socket Strip, Differential Pair

Features
  • 0.80 mm (.0315") pitch
  • Up to 8.5 GHz / 17 Gbps
  • Up to 56 differential pairs
  • Low profile 5 mm stack height
0.80 mm Q Pairs® High-Speed Ground Plane Socket Strip, Differential Pair

QSH-DP

0.50 mm Q Pairs® High-Speed Ground Plane Socket Strip, Differential Pair

Features
  • 0.50 mm (.0197") pitch
  • Low profile 5 mm stack height
  • Up to 80 differential pairs
  • Up to 9.5 GHz / 19 Gbps
0.50 mm Q Pairs® High-Speed Ground Plane Socket Strip, Differential Pair

QSH-DP-RA

0.50 mm Q Pairs® High-Speed Ground Plane Socket Strip, Differential Pair, Right-Angle

Features
  • 0.50 mm (.0197") pitch
  • Guide post
0.50 mm Q Pairs® High-Speed Ground Plane Socket Strip, Differential Pair, Right-Angle

QSS-DP

0.635 mm Q Pairs® High-Speed Ground Plane Socket Strip, Differential Pair

Features
  • Low profile 5 mm stack height
  • Up to 64 differential pairs
  • Up to 8.5 GHz / 17 Gbps
  • 0.635 mm (.025") pitch
0.635 mm Q Pairs® High-Speed Ground Plane Socket Strip, Differential Pair

QTE-DP

0.80 mm Q Pairs® High-Speed Ground Plane Terminal Strip, Differential Pair

Features
  • 0.80 mm (.0315") pitch
  • Up to 8.5 GHz / 17 Gbps
  • Up to 56 differential pairs
  • Low profile 5 mm stack height
0.80 mm Q Pairs® High-Speed Ground Plane Terminal Strip, Differential Pair

QTH-DP

0.50 mm Q Pairs® High-Speed Ground Plane Terminal Strip, Differential Pair

Features
  • 0.50 mm (.0197") pitch
  • Up to 9.5 GHz / 19 Gbps
  • Up to 80 differential pairs
  • Low profile 5 mm stack height
0.50 mm Q Pairs® High-Speed Ground Plane Terminal Strip, Differential Pair

QTH-DP-RA

0.50 mm Q Pairs® High-Speed Ground Plane Terminal Strip, Differential Pair, Right-Angle

Features
  • 0.50 mm (.0197") pitch
  • Guide post
0.50 mm Q Pairs® High-Speed Ground Plane Terminal Strip, Differential Pair, Right-Angle

QTS-DP

0.635 mm Q Pairs® High-Speed Ground Plane Terminal Strip, Differential Pair

Features
  • 0.635 mm (.025") pitch
  • Low profile 5 mm stack height
  • Up to 64 differential pairs
  • Up to 8.5 GHz / 17 Gbps
0.635 mm Q Pairs®  High-Speed Ground Plane Terminal Strip, Differential Pair

The North American Broadcast Show, or NAB, is April 22-27 at the Las Vegas Convention Center.  NAB is about everything digital in the fields of media, entertainment, and technology. Samtec is exhibiting its line of 12G SDI RF interconnects, including a product demonstration showi...
Shielded Connectors For EMI, EMC Protection Samtec is expanding its line of rugged, high-speed 0.80 mm pitch Edge Rate® interconnects. First is a mating set with both socket (ERF8 Series) and terminal (ERM8 Series) strips that are fully shielded. The shield encircles the entire m...
Consumers just want more HD video everywhere they go. The migration from 4G to 5G enables live streaming video consumption everywhere the wireless network reaches. Faster bandwidths via cable or fiber to the home provide the pipe to support the 4K/UHDTV products that are common o...
Kevin Burt, of the Samtec Optical Group, explains another one of the several demos that Samtec presented at OFC 2017.  In this demo, four GT 28 Gbps transceiver signals are generated by an FPGA and launched mid-board from a FireFly™ 28 G x4 optical connector system. These 28 Gbps...
Our friend Eric Bogatin wrote a paper for DesignCon 2017 entitled “New Characterization Technique for Glass-Weave Skew.”  He wrote a summary article of the paper in Signal Integrity Journal. Since many of our readers strive to optimize their signal transmission path, I thought it...
View Full Site