Q Rate® High-Speed Cable Assemblies

Q Rate®

These high-speed cable assemblies feature a ground plane, micro coax or twinax cable and rugged Edge Rate® contacts.

FEATURES

  • Performance to 8.00 Gbps for 0.25 m
  • 50 ohm single-ended and 100 ohm differential pair signal routing
  • Edge Rate® contacts reduce broadside coupling
  • Slim body design
  • 32 AWG twinax and 34 AWG coax high-speed cable

SERIES

EQRD

0.80 mm Q Rate® High-Speed Coax Cable Assembly

Features
  • 0.80 mm (.0315") pitch
  • Rugged Edge Rate® contacts
  • Slim body design
  • 50 ohm single-ended signal routing
  • 34 AWG coax cable
  • Double row system to 120 pins
  • Optional screw downs for the most rugged requirements
0.80 mm Q Rate® High-Speed Coax Cable Assembly

EQRP

0.80 mm Q Rate® High-Speed Twinax Cable Assembly

Features
  • 0.80 mm (.0315") pitch
  • 100 ohm differential signal routing
  • 32 AWG twinax cable
  • Double row system to 108 pins
  • Integral power/ground plane
  • Optional screw downs for the most rugged requirements
  • Rugged Edge Rate® contacts
0.80 mm Q Rate® High-Speed Twinax Cable Assembly

QRF8

0.80 mm Q Rate® Slim Body Ground Plane Socket

Features
  • Rugged Edge Rate® contacts
  • Integral ground/power plane
  • Slim 4.60 mm width
  • Extended Life Product™ (E.L.P.™)
  • 7 mm - 14 mm stack heights
  • Up to 156 positions
  • Dual sourced By Hirose®
  • Samtec 28+ Gbps Solution
0.80 mm Q Rate® Slim Body Ground Plane Socket

QRF8-DP

0.80 mm Q Rate® High-Speed Ground Plane Slim Body Socket Strip, Differential Pair

Features
  • Performance: Up to 10 GHz / 20 Gbps
  • Rugged Edge Rate® contacts
  • Integral ground/power plane
  • Slim 4.60 mm width
  • 7 mm - 14 mm stack heights
  • Up to 108 positions
0.80 mm Q Rate® High-Speed Ground Plane Slim Body Socket Strip, Differential Pair

QRM8

0.80 mm Q Rate® Slim Body Ground Plane Header

Features
  • Rugged Edge Rate® contacts
  • Integral ground/power plane
  • Slim 4.60 mm width
  • Extended Life Product™ (E.L.P.™)
  • 7 mm - 14 mm stack heights
  • Up to 156 positions
  • Dual sourced By Hirose®
  • Samtec 28+ Gbps Solution
0.80 mm Q Rate® Slim Body Ground Plane Header

QRM8-DP

0.80 mm Q Rate® High-Speed Ground Plane Slim Body Terminal Strip, Differential Pair

Features
  • Performance: Up to 10 GHz / 20 Gbps
  • Rugged Edge Rate® contacts
  • Integral ground/power plane
  • Slim 4.60 mm width
  • 7 mm - 14 mm stack heights
  • Up to 108 positions
0.80 mm Q Rate®  High-Speed Ground Plane Slim Body Terminal Strip, Differential Pair

2017 brings increased attention to mid-board optical engines. Samtec’s solution in this space – FireFly™ Micro Flyover System™ – continues to win over new customers in new applications. FireFly™ and other Samtec related optical products are some of the fastest growing product lin...
Today’s electronics industry not only demands higher speeds in smaller form factors, but it also expects these demands to be met with interconnects that hold a reliable connection in any application. Rugged contact systems, micro power interconnects and rugged signal integrity ar...
One of several demonstrations at DesignCon 2017 shows the variety of Samtec interconnects supporting the Xilinx® Virtex® UltraScale+ FPGA VCU118 Development Kit.  Included in the kit is an FMC+ Active Loopback Card, which carries Samtec’s direct attach Flyover™ QSFP28. In the Fly...
In this video, Kevin Burt of Samtec’s Optical Group explains one of Samtec’s product demonstrations at DesignCon 2017.  The demo features a disaggregated computing platform with PCIe® Gen 3 fabric enabled by the patented FireFly™ mid-board optical technology. PCIe® Over Fiber PCI...
At DesignCon 2017, Jim Nadolny, Samtec’s Principle SI and EMI Engineer, presented(1) a technical paper entitled “Design of Flyover QSFP28 (FQSFP Series) for 56+ Gbps Applications.” This white paper discusses the Flyover QSFP (FQSFP) approach for 56+ Gbps applications to overcome ...
View Full Site