Micro High-Frequency 50 Ohm Cable Assemblies

Micro high-frequency system for use when performance and space limitations are a concern.

FEATURES

  • Performance up to 26.5 GHz
  • Semi-flexible cables at .086" or .141" DIA
  • Flexible .047" DIA cable with HMHF1 termination
  • 23 AWG or 25 AWG rugged, solid dielectric microwave cables
  • SMA 2.92 terminations to 26.5 GHz
  • SMP terminations to 20 GHz
  • SMA and Bulls Eye® terminations also available

SERIES

MH081

Micro High Frequency RF Cable Assembly, 0.81 mm DIA Coax Cable

Features
  • 36 AWG, 0.81 mm (.032") diameter cable
  • 50 ohm impedance
  • Available with MHF1 type plug, MHF3 type plug or SMA bulkhead jack terminations
  • U.FL and W.FL types
  • Performance up to 3 GHz
Micro High Frequency RF Cable Assembly,  0.81 mm DIA Coax Cable

MH113

Micro High Frequency RF Cable Assembly, 1.13 mm DIA Coax Cable

Features
  • 32 AWG, 1.13 mm (.045") diameter cable
  • 50 ohm impedance
  • Available with MHF1 type plug or SMA bulkhead jack terminations
  • U.FL type
  • Performance up to 3 GHz
Micro High Frequency RF Cable Assembly,  1.13 mm DIA Coax Cable

RF047

50 Ohm .047" Diameter RF Flexible Cable Assembly

Features
  • 28 AWG, CCA 047 (.047") cable
  • 50 ohm impedance
  • Available with SMA and HMHF1 terminations
  • U.FL compatible plug to 500 cycles (HMHF1)
50 Ohm .047" Diameter RF Flexible Cable Assembly

RF402

50 Ohm RF Cable Assembly, 19 AWG Semi-Flexible Cable

Features
  • 50 ohm impedance
  • 19 AWG hand-formable, semi-flexible cable (.141" DIA)
  • Straight or right-angle SMA plug cable terminations
50 Ohm RF Cable Assembly, 19 AWG Semi-Flexible Cable

RF405

50 Ohm RF Cable Assembly, 24 AWG Semi-Flexible Cable

Features
  • Performance up to 40 GHz
  • 50 ohm impedance
  • 24 AWG hand-formable, semi-flexible cable (.086" DIA)
  • Straight or right-angle SMA or SMP plug cable terminations
50 Ohm RF Cable Assembly, 24 AWG Semi-Flexible Cable

CONTACT SALES

First Name
Last Name
Email
Company
Industry
Estimate Annual Usage
Family
Message

Don't want to fill out a form?
Chat with a product expert directly.

.
.
Many of our Samtec blogs focus on high-speed, high-bandwidth, cutting-edge connector applications. This makes sense because Signal Integrity is a critical issue for many of our customers, and because it’s a more flashy, attention-grabbing, sexy topic. And yes, I did just use the ...
Many electronics experience a wide range of climates while in operation and storage. Because of this fact, connector humidity testing is used to determine the ability of a product to withstand elevated humidity and cycling temperatures. Humidity testing is conducted in combinatio...
In this new video, Samtec’s Kevin Burt introduces Samtec Direct Connect™. Direct Connect gives the benefit of exiting a higher number of lanes at low loss from the chip package, which can be very useful in both high performance computing and network switching applications, especi...
This is the first release of a few phases of a new login system for Samtec.com. This replaces a system that was built in 2011 and has been running well ever since. But, technology changes over time, and it was time for an upgrade. Here are some additional details about the featur...
Modern electronic devices are getting smaller with every new generation, and as a result, they are becoming more portable.  At the same time, the performance of these devices is growing as the demands of consumers become greater.  We expect to be able to connect to the internet w...