75 ohm miniature quick connect/disconnect BNC RF interfaces.

FEATURES

  • Optimized for 12G-SDI Broadcast Video solutions
  • 75 Ω performance up to 12 GHz
  • Available in a variety of orientations
  • RG 179, RG 6 or Belden 1694A cables available

SERIES

BNC7T-CA

75 Ohm BNC Jack and Plug, Cable Termination

Features
  • 75 ohm BNC cable component
  • Straight or right-angle plug available on RG 179, RG 6 or Belden 1694A cables
75 Ohm BNC Jack and Plug, Cable Termination

RF179

75 Ohm RF Cable Assembly, RG 179 Cable

Features
  • 30 AWG, RG 179 cable
  • 75 ohm impedance
  • Available with BNC, Mini BNC, DIN, MCX or SMB terminations
  • Single or double ended
75 Ohm RF Cable Assembly, RG 179 Cable

RFA6T

75 Ohm RF Cable Assembly, RG 6 Cable

Features
  • 18 AWG, RG 6 cable
  • Available with High-density BNC, Mini BNC, BNC or DIN terminations
75 Ohm RF Cable Assembly, RG 6 Cable

RFB6T

75 Ohm RF Cable Assembly, 1694A Cable

Features
  • Available with High-density BNC, Mini BNC, BNC or DIN terminations
  • 18 AWG, Belden 1694A cable
75 Ohm RF Cable Assembly, 1694A Cable

BNC7T-BH

75 Ohm BNC Bulkhead Jack

Features
  • Optimized for 12G-SDI Broadcast Video solutions
  • 75 ohm impedance
  • Standard right-angle bulkhead jack
75 Ohm BNC Bulkhead Jack

BNC7T-EM

75 Ohm BNC Jack, Edge Mount

Features
  • Optimized for 12G-SDI Broadcast Video solutions
  • 75 ohm impedance
  • Standard edge mount or die cast edge mount
  • Available for .062" (1.60 mm) or .093" (2.40 mm) PCBs
75 Ohm BNC Jack, Edge Mount

BNC7T-TH

75 Ohm BNC Jack, Through-hole

Features
  • Optimized for 12G-SDI Broadcast Video solutions
  • 75 ohm impedance
  • Vertical or right-angle through-hole terminations
75 Ohm BNC Jack, Through-hole

BNC7T-BM

75 Ohm BNC Low Profile, Mixed Technology Die Cast Bulkhead Jack

Features
  • Optimized for 12G-SDI Broadcast Video solutions
  • 75 ohm impedance
  • Low profile, right-angle mixed technology die cast bulkhead jack
  • For (1.60 mm) .062" PCB
75 Ohm BNC Low Profile, Mixed Technology Die Cast Bulkhead Jack

In November, we continued our mobile updates to the website, released a couple of new content experiences, and made placing sample requests even easier. Read more below on these and the rest of the major updates to Samtec.com for November 2018. Continued Improvements to our Mobil...
A joint demonstration between Samtec and eSilicon — an eSilicon 7 nm 56 Gbps DSP SerDes over a Samtec 5 meter ExaMAX® backplane cable assembly — caught a lot of attention at SC18. The demo showed a true long-reach capability with a high-performance, flexible, easy-to-configure Se...
Over the past few years, Samtec has expanded its portfolio of Characterization and Development Kits. Engineers and designer demand the best tools for system prototyping. From concept and prototype to development and production, Samtec-designed Characterization and Development Kit...
That’s shocking! Insulation Resistance and Dielectric Withstanding Voltage are two of the qualification tests that Samtec performs in-house during part qualification testing. These tests will ensure that when a connector is used in environmental conditions at the rated working vo...
As corporations worldwide become more mobile-friendly to their workforce, the Internet needs to evolve to match. This has been a huge trend in the B2C space for the last decade, and is now quickly catching up to the B2B space. We’ve seen our mobile user base grow rapidly in the p...