Precision & Standard RF Solutions
Samtec offers complete RF interconnect solutions supporting traditional sub-6 GHz frequencies to 110 GHz microwave/mmWave frequencies (sub-Terahertz spectrum). Products include end-to-end RF cable assemblies, board connectors, cable connectors, adaptors and Samtec Original RF Solutions.
Cables
Phase & amplitude stable cables
Microwave assemblies to 110 GHz
RG cable solutions (RG316, RG174, RG178, etc.)
Connectors
Compression mount for test & measurement applications
Board-to-board & cable-to-board
Precision in-series & between-series adaptors
Original
Solutions
Unique solutions for common challenges
Ganged, multi-port solutions
Innovative interfaces
Technical
Support
Industry leading expertise
Full system optimization
Customization & quick-turn modifications
High-Quality Performance
Our goal is to blend industry-leading system-level signal integrity expertise with high-quality RF products that meet mechanical, precision and performance expectations every time.
RF Cable Assemblies
Samtec offers a wide range of RF cable assemblies available with low-loss microwave / millimeter wave cable from .047 to .277, RG type cable (316, 174, 178, 58, 179, 6), 12G-SDI Belden cables, high-density ganged and Samtec-optimized varieties. Interface types include 1.00 mm, 1.35 mm, 1.85 mm, 2.40 mm, 2.92 mm, SMA, SMPM, SMP, MCX, MMCX, BNC, High-Density BNC, MHF U.FL/W.FL, and more.
Nitrowave™
50 Ohm Microwave Cables
High-frequency 18 to 110 GHz cable assemblies with low loss and semi-flexible microwave/millimeter wave cable from .047 to .277, high-density ganged and Samtec-optimized varieties with mix-and-match end options.
Low Frequency RF Cables
Standard off-the-shelf, traditional sub-6 GHz frequency cable assemblies with RG type cable (316, 174, 178, 58, 179, 6), 0.81 and 1.13 mm Micro High Frequency, 12G-SDI and Samtec optimized varieties with mix-and-match standard 50 and 75 ohm end options.
Bulls Eye®
Magnum RF™
Ganged, multi-port RF blocks and cable assemblies for millimeter wave applications. Ideal when space is limited and a high operating frequency is required.
Flexible Waveguide
Samtec’s new, high-frequency micro waveguide technology supports the demands of next generation millimeter wave systems. It uses a cable design allowing flexibility and a reduced size, yet also maintains loss performance similar to that of a traditional waveguide.
Ganged Micro Scale
Samtec's ganged micro-miniature high-performance RF jacks, plugs, and cables are on a 5.00 mm pitch and available as board-to-board or cable-to-board systems.
Shielded Twisted Pair Cable System
High-speed shielded twisted pair cable assembly for 100 ohm applications.
IsoRate®
IsoRate® 50 ohm high-isolation RF connectors and cables offer substantial savings over traditional RF connectors at approximately half the cost.
RF Connectors
RF connectors are available for cable-to-board or board-to-board, ganged and blind-mate applications. Interface types include 1.00 mm, 1.35 mm, 1.85 mm, 2.40 mm, 2.92 mm, 3.50 mm, SSMA, SMA, SMPM, SMP, TNCA, N Type, MCX, MMCX, SMB, TNC, BNC, High-Density BNC, in-series or between-series adaptors, and many more.
SMPM Precision RF, 50 Ohm
High-frequency Precision RF interconnects to 65 GHz; single-port SMPM or multi-port ganged Magnum RF™ solutions.
DIN 1.0/2.3 75 Ohm
75 ohm DIN 1.0/2.3 RF connectors have push-pull coupling and are designed for high-density applications.
HD-BNC 75 Ohm
High-Density BNC RF connectors, 75 Ohm with 4x the density of standard BNC solutions.
MCX 50 & 75 Ohm
Mini coax interconnects featuring a space-saving design which is approximately 30 percent smaller than SMBs.
SMB 50 & 75 Ohm
Subminiature interconnects featuring snap-on coupling and a space-saving alternative to SMAs.
In-Series Adaptors, Precision RF, 50 Ohm
High-frequency precision RF in-series adaptors for SMPM, 1.85 mm, 2.40 mm or 2.92 mm interconnects.
Between-Series Adaptors, Precision RF, 50 Ohm
High-frequency Precision RF between-series adaptors for 1.00 mm to 1.85 mm or SMPM to 2.92 mm connections.
Magnum RF™
Ganged, multi-port RF blocks and cable assemblies for millimeter wave applications. Ideal when space is limited and a high operating frequency is required.
Flexible Waveguide
Samtec’s new, high-frequency micro waveguide technology supports the demands of next generation millimeter wave systems. It uses a cable design allowing flexibility and a reduced size, yet also maintains loss performance similar to that of a traditional waveguide.
Ganged Micro Scale
Samtec's ganged micro-miniature high-performance RF jacks, plugs, and cables are on a 5.00 mm pitch and available as board-to-board or cable-to-board systems.
Shielded Twisted Pair Cable System
High-speed shielded twisted pair cable assembly for 100 ohm applications.
IsoRate®
IsoRate® 50 ohm high-isolation RF connectors and cables offer substantial savings over traditional RF connectors at approximately half the cost.
RF Original Solutions
High-frequency and low-frequency RF products that are unique to Samtec. This includes Bulls Eye® for test and measurement, Magnum RF™ multi-port blocks and cable assemblies, Flexible Waveguide for E-band, Ganged and Micro-Mini Systems, 100 Ohm Shielded Twisted Pair Assembly, IsoRate® high-isolation RF, and 75 Ohm or high-vibration MMCX solutions.
Bulls Eye®
Magnum RF™
Ganged, multi-port RF blocks and cable assemblies for millimeter wave applications. Ideal when space is limited and a high operating frequency is required.
Flexible Waveguide Original Solutions
Samtec’s new, high-frequency micro waveguide technology supports the demands of next generation millimeter wave systems. It uses a cable design allowing flexibility and a reduced size, yet also maintains loss performance similar to that of a traditional waveguide.
Ganged Micro Scale
Samtec's ganged micro-miniature high-performance RF jacks, plugs, and cables are on a 5.00 mm pitch and available as board-to-board or cable-to-board systems.
Shielded Twisted Pair Cable System
High-speed shielded twisted pair cable assembly for 100 ohm applications.
IsoRate®
IsoRate® 50 ohm high-isolation RF connectors and cables offer substantial savings over traditional RF connectors at approximately half the cost.
Precision RF Solutions
The Precision RF product line includes 18 to 110 GHz high-frequency, Precision RF solutions for microwave and millimeter wave applications, including cable assemblies, cable connectors and board level interconnects.
Samtec designs and manufactures our own high-frequency cables and connectors. In doing so, we're able to ensure the highest quality products that provide precise, repeatable electrical and mechanical results every time.
Mix & Match Solutions
Samtec offers a variety of end options for each product series; this blends application-specific customization with the simplicity and lead-time efficiencies of an off-the-shelf assembly.
RF Design Experts & Technical Support
Samtec's Signal Integrity / RF Design & Simulation Engineers provide personal support for solving complex system challenges. In addition, a variety of resources are available online which help answer questions specific to microwave / millimeter wave system design.
Contact the experts at [email protected] for additional support.
Application Specific
Design Support
Launch
Optimization
Test & Measurement
Verification
Simulation/Prototype
Assistance
Full Channel
Analysis
Everything Precision RF
Learn More
Tools
Videos
For additional information or questions contact: [email protected]
More than 200,000 connectors and cables in our Reserve® program ship to you in 1-day. Guaranteed.
Learn more.
