IDC & FFC

IDC wire cable assemblies with high reliability Tiger Eye™ contacts on 1.27 mm and 2.00 mm pitch, as well as dual beam contacts on 2.54 mm pitch. Choice of socket and plug terminations, low profile and slim body designs; ejector, shrouded and elevated headers for mating, and optional locking clips and caps for more rugged applications.


.100" (2.54 mm) Pitch IDC Systems.100" (2.54 mm) Pitch IDC Systems

Mates with .025" (0.635 mm) square post terminal strips.

Features
  • Any pin count from 2 to 36 per row
  • Low profile/slim body design
  • Single and double row
  • Socket and terminal assemblies
  • Mating shrouded & ejector terminal strips
  • Wide variety of standard wiring configurations
Series
V
  • EJH
  • HCMD
  • HCMS
  • HCSD
  • HCSS
  • HTST
  • IDMD
  • IDMS
  • IDSD
  • IDSS
  • TST
  • ZST
Help Me Choose?
.100" (2.54 mm) Pitch IDC Systems

2.00 mm (.0787") Pitch IDC Systems2.00 mm (.0787") Pitch IDC Systems

Mates with 0.50 mm (.0197") square post terminal strips.

Features
  • High-performance Tiger Eye™ contacts
  • Choice of socket and plug terminations
  • Low 5.08 mm (.200") profile
  • Variety of options including strain relief
  • Mating shrouded & ejector terminal strips
  • Wide variety of standard wiring configurations
Series
V
  • EHT
  • ETMM
  • STMM
  • TCMD
  • TCSD
  • ZSTMM
Help Me Choose?
2.00 mm (.0787") Pitch IDC Systems

.050" (1.27 mm) Pitch IDC Systems.050" (1.27 mm) Pitch IDC Systems

Mates with .016" (0.41 mm) square post terminal strips.

Features
  • High-performance Tiger Eye™ contacts
  • Choice of socket and plug terminations
  • Exceptionally low profile .200" (5.08 mm)
  • Variety of options including strain relief
  • Mating shrouded & ejector terminal strips
  • Wide variety of standard wiring configurations
Series
V
  • EHF
  • ESHF
  • FFMD
  • FFSD
  • FFTP
  • FMTP
  • SHF
Help Me Choose?
.050" (1.27 mm) Pitch IDC Systems

2.00 mm (.0787") Pitch Discrete Wire IDC System2.00 mm Pitch Discrete Wire IDC System

Cable-to-board system for ease of termination in field applications.

Features
  • Components only, customer assembly
  • No special tooling required
  • Available in 2, 3, 4 or 5 positions
  • Accepts 24 AWG discrete wire cable
  • Standard single latch for locking
Series
V
  • I2SS
  • T2I
2.00 mm (.0787") Pitch Discrete Wire IDC System

Flat Flexible Cable (FFC) SystemsFlat Flexible Cable (FFC) Systems

FFC Jumpers and Connectors

Features
  • 0.50 mm (.0197") and 1.00 mm (.0394") pitch systems
  • Standard and Zero Insertion Force (ZIF) connectors
Series
V
  • FC1
  • FJ
  • FJH
  • ZF1
  • ZF5S
Flat Flexible Cable (FFC) Systems

A key component of any high-speed signal path is the interconnect.  Design engineers must identify the right connector (or connectors) and the best performance for the application. At 56 Gbps PAM4 data rates (and higher), connector selection becomes more challenging. Interconnect...
It’s been over a year since we last updated the Samtec homepage. As you may have already noticed, we recently took some time to refresh it. You can see a comparison below of the old homepage (top), vs the new homepage (bottom). The new update puts more attention on our high speed...
If you manufacture overseas and ship into the U.S.A, you may have a longer waiting time in Customs than you would prefer.  Some of this waiting time could be eliminated by becoming part of the Customs Trade Partnership Against Terrorism (C-TPAT), one layer of the U.S. Customs and...
Just about everybody wishes they had more time to pursue a hobby or a side project.  Some aspire to be painters or furniture makers.  Others like to rebuild cars.  Even others enjoy electronics in any form. The Maker Movement attracts and caters to tinkerers, hobbyists, students ...
Demand For High Data Rate As the need for bandwidth continues to increase, so does the need for higher data rates within a system. What was once one to three Gbps, then moved to 4 to 8 Gbps, and now we are approaching 28 Gbps and looking forward to 56 G. This trend was recently [...
View Full Site