High-Speed (0.80 mm) Pitch Edge Card

High-Speed (0.80 mm) Pitch Edge Card

High-speed edge card sockets with rugged Edge Rate® contacts.

FEATURES

  • Performance: Up to 18.5 GHz / 37 Gbps
  • Rugged Edge Rate® contacts
  • Card slot: 1.60 mm (.062")
  • Single-ended and differential pairs
  • Vertical, right-angle, edge mount
  • Optional board locks and cable latching features
  • Optional weld tab for mechanical strength
  • RU8 system for elevated board stacking

VIDEOS

Samtec Advanced Interconnect Design Tech Center

High Speed Edge Card Sockets

SERIES

HSEC8-DV

0.80 mm Edge Rate® High-Speed Edge Card Connector, Vertical

Features
  • Rugged Edge Rate® contact
  • Single-ended and differential pairs
  • Card slot: .062" (1.60 mm)
  • Pass-through option available (HSEC8-PE)
  • Optional board locks and cable latching features
  • Optional weld tab for mechanical strength
  • Samtec 28+ Gbps Solution
  • Extended Life Product™ (E.L.P.™)
0.80 mm Edge Rate® High-Speed Edge Card Connector, Vertical

HSEC8-RA

0.80 mm Edge Rate® High-Speed Edge Card Connector, Right-Angle

Features
  • Performance up to 18.5 GHz / 37 Gbps
  • Rugged Edge Rate® contact
  • Single-ended and differential pairs
  • Card slot: .062" (1.60 mm)
  • Optional board locks and cable latching features
  • Solder tabs for mechanical strength
  • Extended Life Product™ (E.L.P.™)
0.80 mm Edge Rate® High-Speed Edge Card Connector, Right-Angle

HSEC8-EM

0.80 mm Edge Rate® High-Speed Edge Card Connector, Edge Mount

Features
  • Rugged Edge Rate® contact
  • Single-ended and differential pairs
  • Card slot: .062" (1.60 mm)
  • Solder tabs for mechanical strength
  • Extended Life Product™ (E.L.P.™)
0.80 mm Edge Rate® High-Speed Edge Card Connector, Edge Mount

HSEC8-PV

0.80 mm Edge Rate® High-Speed Edge Card Power Combo Connector

Features
  • Rugged Edge Rate® contact
  • Card slot: .062" (1.60 mm)
  • Choice of 2 or 4 power banks
  • Optional weld tab for mechanical strength
  • Samtec 28+ Gbps Solution
  • Extended Life Product™ (E.L.P.™)
  • UL: File # E111594
0.80 mm Edge Rate® High-Speed Edge Card Power Combo Connector

RU8

0.80 mm High-Speed Edge Card Connector/Riser Kit

Features
  • High-speed riser card system
  • 19 mm, 25 mm and 30 mm standard stack heights
  • Rugged Edge Rate® contact
  • Single-ended and differential pairs
  • Optional board locks
  • Extended Life Product™ (E.L.P.™)
0.80 mm High-Speed Edge Card Connector/Riser Kit

HSC8

0.80 mm High-Speed Riser Card

Features
  • .062" (1.60 mm) thick card
  • Mates with HSEC8 for a complete assembly
  • Single-ended or differential pair signal routing
  • Variety of stack heights
0.80 mm High-Speed Riser Card

HSEC8-DP

0.80 mm Edge Rate® High-Speed Edge Card Connector, Differential Pair

Features
  • Up to 56 differential pairs
  • Performance up to 20 GHz / 40 Gbps
  • Accepts .062" (1.60 mm) thick cards
  • Optional weld tab
0.80 mm Edge Rate® High-Speed Edge Card Connector, Differential Pair

CONTACT SALES

First Name
Last Name
Email
Company
Industry
Estimate Annual Usage
Family
Message
.
.
Data, data, data is everywhere. From streaming video to edge computing, system designers are challenged to meet the needs of the networks (and consumers). From servers and switches to networking equipment, OEMs developing next-gen devices with high performance communications face...
I want to believe. Not only could Eugene Victor Tooms hibernate for 30-year stints, but he could squeeze and elongate his body to pass through narrow openings. In the supernatural thriller The X-Files, Tooms managed to fit through elevator shafts, air vents, chimneys, and almost ...
One topic that garnered much interest at the Samtec booth at the International Microwave Symposium was a dynamic stress test of Samtec’s microwave cable. This demonstration proves that our low-loss, microwave cable withstands high flex cycles and still maintains signal integrity....
The PCI-SIG Developers Conference is a free event for the 800+ member companies that develop and bring to market new products utilizing PCI Express® technology. Granted most people reading this blog won’t be at the conference, but you might be interested in learning more about Sa...
In the first article of this series, we looked at how contacts are formed. This time, we’ll investigate the next step in the manufacturing process – plating. Have you ever looked closely at an electrical contact?  Contacts may be small and hard to see, but they are the most impor...